Discussion:
IS300 Dome Light
(too old to reply)
stocktong
2006-11-26 23:24:15 UTC
Permalink
I need to replace the bulb for my dome light. I am unsure how to get at
the lightbulb as the assembly is quite tightly snug into the roof. My
assembly has the button for the light to the right, on the left of the
light is the tilt and the slide button for the sunroof.
Ray O
2006-11-27 16:30:04 UTC
Permalink
Post by stocktong
I need to replace the bulb for my dome light. I am unsure how to get at
the lightbulb as the assembly is quite tightly snug into the roof. My
assembly has the button for the light to the right, on the left of the
light is the tilt and the slide button for the sunroof.
There should be instructions in your owner's manual, but in general, the
lens for dome lights just snap in and out.
--
Ray O
(correct punctuation to reply)
stocktong
2006-11-27 23:52:14 UTC
Permalink
Interesting. Its like the lense sits inside the facing, I can't see a
way to get it out without breaking it. The info in the manual did not
show how to open the dome assembly.
Post by Ray O
Post by stocktong
I need to replace the bulb for my dome light. I am unsure how to get at
the lightbulb as the assembly is quite tightly snug into the roof. My
assembly has the button for the light to the right, on the left of the
light is the tilt and the slide button for the sunroof.There should be instructions in your owner's manual, but in general, the
lens for dome lights just snap in and out.
--
Ray O
(correct punctuation to reply)
Ray O
2006-11-28 05:14:29 UTC
Permalink
Post by stocktong
Interesting. Its like the lense sits inside the facing, I can't see a
way to get it out without breaking it. The info in the manual did not
show how to open the dome assembly.
Post by Ray O
Post by stocktong
I need to replace the bulb for my dome light. I am unsure how to get at
the lightbulb as the assembly is quite tightly snug into the roof. My
assembly has the button for the light to the right, on the left of the
light is the tilt and the slide button for the sunroof.There should be
instructions in your owner's manual, but in general, the
lens for dome lights just snap in and out.
--
Ray O
(correct punctuation to reply)
Most likely, you can pop the lens off with a screwdriver.
--
Ray O
(correct punctuation to reply)
Jeff Bertrand
2006-12-08 15:50:57 UTC
Permalink
Post by stocktong
I need to replace the bulb for my dome light. I am unsure how to get at
the lightbulb as the assembly is quite tightly snug into the roof. My
assembly has the button for the light to the right, on the left of the
light is the tilt and the slide button for the sunroof.
I have to replace two dome light bulbs already. The frame around the lens
and the switches unsnaps from the housing in the ceiling of the car. Grab
the rear edge with your fingers and flex it downward and outward. It seems
like it's going to break, but it won't. kind of a cheesy design for a car
like a Lexus, I'd rather have a straightforward Phillips head screw or
something.
--
-WJB
Loading...